Solving Print Graph” This section offers solutions to some of the most common problems people have when using print graph. If you have a problem using print graph, try the following.
- Press F1 (Help) for Help about print graph command or error message.
- Look for the solution section.
- Consult your computer dealer or technical resource person.
- If you are using 1-2-3 on a network, see your network administrator. If necessary, he or she can call customer support with your problem and information about your network.
Solving Print Graph Problems and Solution
When I try to run print graph, I get a message that says that there is no driver for the graph print I selected.
The printer setting you saved in print graph does not match any of the graph printers you selected in the install program. Press ESC to clear the error message and select it. Then select setting save the information for future printer graph sessions. If the correct printer is not in the list end printgraph and run the install program to select a driver for the graphics printer you want to use.
When I try to start PrintGraph from the Access system I get the message cannot find
This problem is often caused by terminate-and-stay-Resident (TSR) programs you may be running such as Bprint or local area network software. Unload any such programs and try running Print Graph again. Unloading TSRs may involve turning the computer off and restarting it.
Sometimes my printed graphs look different the way they looked on the screen.
This occurs because your printer’s capabilities are different from those of your monitor. For instance, your printer may use a different font from the one on the screen or your printer may size characters differently
When I try to print a graph I get a message that says no graphics printer is active.
You did not select a graphics printer in the install program, or you did not indicate the graphics printer you want to use with the print graph settings hardware printer command. To install a graphics printer, leave print graph and use change selected Equipment in the install program, for more information, to select a graphics printer to use select setting hardware printer from the print graph menu and select the printer.
Is there a way I can print four graphs on a single page?
Select Setting image size Manual and specify the following settings. Left 750, Top 395, Width 3.25, Height 4.691, Rotation 0., Then use image select to choose two graphs to print. Select go to print them. The two graphs print on the left side the page.
After the first two graphs finish printing roll the paper back to the top of the page and select two more graphs for Printing, then select settings image size manual and set the left margin to 4.0 select go, and the two graphs will print On the right side of the page.
Print graph has default top and bottom margins of .5 inch that it adds to what you specify for the top margin. Even if You set the top margin to 0 (zero), the top margin will be .5 inch.